User login

Quick Cure Epoxy Ink on metal??

Posted on Sat, 22 Jun 2002 at 10:43



Can anyone recommend a quick cure Epoxy ink that you can flash cure below 180 degrees for instant handling, and which will fully cure within a couple of days? Substate is annodized aluminum.

Location of Opportunity or Item

Comments

Anonymous says: NazDar has a good air cure epoxy, don't know abour flash curing but know it will dry under air movement in 3 to 4 hours. Reaches total cure in 7 days. Not recommended for outdoor use. posted on: Sun, 06/23/2002 - 6:06am
Anonymous says: In a word, no. You can get some "synthetic enamels" (if anyone still makes them) that could stick to the aluminum and would cure with some forced heat, but whether or not they would work for the end use ...

In a word, no. You can get some "synthetic enamels" (if anyone still makes them) that could stick to the aluminum and would cure with some forced heat, but whether or not they would work for the end use you want to put them to............

posted on: Mon, 06/24/2002 - 9:26am
Anonymous says: Hi there, I'll put my two cent's in. Are you talking about UV cureing, if you are I've had great results with Polymeric Imaging's UV Lazer on metal it does not require a catalist so there is no waste ...

Hi there, I'll put my two cent's in. Are you talking about UV cureing, if you are I've had great results with Polymeric Imaging's UV Lazer on metal it does not require a catalist so there is no waste and it adheares to metal like baby poop to a blanket.

posted on: Sun, 08/04/2002 - 9:54pm
Anonymous says: we are arab pharmaceutical glass co., suez egypt We plan for manufacturing prented aluminum caps , We are in aneed for complete printing line to do prints on 5,000 aluminum sheets/day .,We will apprecite ...

we are arab pharmaceutical glass co., suez egypt

We plan for manufacturing prented aluminum caps , We are in aneed for complete printing line to do prints on 5,000 aluminum sheets/day .,We will apprecite your recommendation for three companies which are specialists in manufacturing this kind of printing lines

WE APPRECIATE YOUR C0-0PERATIONS

A.P.G. PLANNING MANAGER

MHAMOUD EL-FASS

posted on: Thu, 09/19/2002 - 6:46am
Anonymous says: Dear Sir, Subjects: silk screen paint for taps We are producer of taps, looking for paint for silk screen printing with the following characteristics: 1. adhere to chrome plated surface of metal and plastic 2. ...

Dear Sir,

Subjects: silk screen paint for taps

We are producer of taps, looking for
paint for silk screen printing with
the following characteristics:

1. adhere to chrome plated surface
of metal and plastic

2. can retain hardness and adhesion
after soaking in water for 24 hours

3. preferred to be air cooled, no need
for oven curing.

With best regards,

Alex Lung

Longman Ent. Co.

posted on: Sat, 10/23/2004 - 9:15pm

Did you enjoy this article? Click here to subscribe to the magazine.